Beijer-electronics RBC EN Bedienungsanleitung PDF herunterladen (Seite 20)

Operation

3.6 Additional Software

Note:

The delivered software is for Windows operating systems only. It was written for

Windows XP and Windows 7.

The software needs to access interfaces like COM ports and US B. There fore the

software needs to be run as administrator otherwise it will not function correctly. If

the user is not logged in as adminis tra tor, the Windows tool "runas" can be used. The

disadvantage of "runas" is that administrator and password must be known.

There are commercial tools on the market where these inputs can be set once by the

administrator resulting in that the software thereafter can be run with administrator

privileges by any user.

3.6.1 RBC Router

The RBC Router is a service that handles SCOM commands. It is a part of the

Monitor Control Center. The task of the RBC Router in general is to receive

SCOM commands from input interfaces and transfer them to the output

interfaces. Additionally, the output interfaces are scanned for answers or for ne w

commands which are transferred to other monitors or interfaces. A typical ne w

command is the brightness command transmitted from a monitor just controlling

other monitors. The conﬁguration of the input and output interfaces and the

selection of different o ptions can be determined by a conﬁgurator. The RBC

Router can be started and stopped using the Monitor Control Center.

IftheRBCFirmwareConﬁguratorisrunning,itdependsonthetypeof

connection to the RBC module if the RBC Router is needed or must not r un.

Make sure to use every monitor address in a network only one time.

Related information

RBC Router Conﬁguration

Firmware Conﬁguration

RBC Viewer

3.6.2 RBC Router Conﬁguration

Before starting the RBC Router, it is recommended to make the conﬁguration.

The tool RBCRouterConﬁgurator.exe, part of the Monitor Control Center, offers

a convenient way for this conﬁguration. ToreduceanyoverheadwhiletheRBC

Router is operating, the conﬁguration should exactly ﬁt the customers needs. The

input interfaces typically specify conne ctions to other PCs or super vising PCs.

The output inter faces typi cally specify connections to RBC modules, allowing

only enabling of the interfaces in use.

Additional options allow

• returning answers from output to input interfaces

• forwarding (brightness) commands fro m one output to all output inter faces

• for w arding (brightness) commands from one output to all input interfaces

• searching for non-Beijer Electronics/Lauer devices

• specifying the highest monitor address in use

• specifying the time-out for answers

Beijer Electronics, MAEN986C

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

Kommentare zu diesen Handbüchern

Keine Kommentare

Beijer-electronics RBC EN Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schalttafel Beijer-electronics RBC EN