Beijer-electronics SCOM Protocol EN Bedienungsanleitung PDF herunterladen (Seite 25)

Command Reference

Beijer Electronics, MAEN975 25

Response Message (Acknowledge)

Response Message (Negative Acknowledge)

Under normal operation conditions, a device never sends a negative acknowledge in

response to this command.

MCC Sub-commands

All supported MCC sub-commands are described in the following sections.

0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]

0x06 ADR 0x4D 0x43 0x43 LEN ICHKH SCMD Param Ret ICHKD

SCMD / Param

Video controller specific sub-command and parameter(s), sent with the

command stream

Ret

Data returned by the monitor, i.e. current value of the selected video

controller setting

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 130 131

SCOM Protocol 1
Foreword 2
Contents 3
1 Interface Configuration 7
2 Ethernet Communication 8
Dynamic Addressing 9
Static Addressing 9
Sample Application 10
SCOM Message Basic Format 11
4 Monitor Addressing 13
Ti: Inter-message gap [s] 14
Delayed Response 15
Related information 16
6 Command Reference 17
6.1 BRT 18
6.2 MAN 20
6.3 VER 21
6.4 POT 22
6.5 MCC 24
6.6 MCC_BRIGHTNESS (0x81) 26
6.7 MCC_CONTRAST (0x82) 29
6.8 MCC_SCALINGMODE (0x8C) 32
6.9 MCC_GAMMAVALUE (0x9D) 34
6.10 MCC_COLOURTEMP (0xB3) 36
6.11 MCC_REDLEVEL (0xB4) 38
6.12 MCC_GREENLEVEL (0xB5) 41
6.13 MCC_BLUELEVEL (0xB6) 44
6.14 TYP 47
6.15 ETC 48
6.16 LAU 50
Firmware Version 52
Host Name 53
MAC (Ethernet) Address 55
Static IP Address 56
Subnet Mask 57
Gateway Address 58
DHCP Mode 59
(0x0109) 60
(0x010A) 61
(0x010B) 62
(0x010C) 63
(0x010D) 64
DIL Switch Mode 65
(0x010F) 66
(0x0110) 67
Baudrate 70
POT Mode 71
ECDIS Mode 72
(0x0115) 73
(0x0116) 74
(0x0117) 75
(0x0118) 76
(0x0119) 77
(0x011A) 78
(0x011B) 79
(0x011C) 80
(0x011D) 81
(0x011E) 82
(0x011F) 84
(0x0120) 85
(0x0122) 88
(0x0123) 90
0 1 2 3 4 5 6 7...8 9 91
0 1 2 3 4 5 6 7 8 91
(0x0125) 92
(0x0127) 93
ECDIS Mode Control 94
Buzzer Control 96
Digital Output Control 98
6.57 LAU_CONTROL_ANALOGTOBRT 100
(0x0204) 100
0 1 2 3 4 5 6 7...9 10 101
0x07 0x07 101
(0x0205) 102
Command Reference 103
Example 103
Digital Input Configuration 104
Current IP Address 106
Current Monitor Address 107
Current POT Mode 110
Current ECDIS Mode 111
Current Buzzer State 112
Current Backlight State 113
Current Analog Input Value 117
(0x030C) 119
(0x030E) 122
7 Sample Communication 125
Application 125

Kommentare zu diesen Handbüchern

Keine Kommentare

Beijer-electronics SCOM Protocol EN Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Monitore Beijer-electronics SCOM Protocol EN